Model 108 PTROL Series Reverse Osmosis System

Product Specs

ManufacturerEWP-USA
SKUPTROL-108
DescriptionReverse Osmosis Systems from 15m3/h to 100m3/h (Feed TDS < 2500 ppm).

The smart, clean, and practical industrial design of EWP-USA's PTROL Series allows for convenient installation, user-friendly operation, and ease of maintenance. These skid-mounted, packaged systems are pre-plumbed and pre-wired complete on a steel frame with panel-mounted pressure and flow instrumentation allowing for straight forward system monitoring and control. EWP-USA offers an assortment of both basic and premium designs of pure water systems that can be private labeled or customized.
Connection port Feed inlet port
Permeate port
Drain port
Clean-in-place (CIP) ports
Documentation included Operation and maintenance manual
Drawings: P&ID, electrical diagram
Control system Siemens PLC
Weinview HMI
ABB VFD
Parameter setting panel
High pressure pump soft start
Tank level control
Low pressure/High pressure protection
Auto flush
Pretreatment interconnection backup
Options and Upgrades PLC controller
Feed water conductivity meter
pH and ORP meter
Grundfos/Danfoss pump
Dow/Hydranautics/Toray membrane
VPN internet
Flow transmitter with pulse signal output
Pressure transducer with analog signal output
Communication: Modbus RTU
SS304/316 seamless housing
Antiscalant dosing system
Clean-in-place (CIP) system
Pretreatment system
Benefits Fully equipped and customizable
Individually tested and preserved
Expandable and skid mounted
Low operation and maintenance costs
Components are easily accessible
Easy maintenance and servicing
Pre-plumbed, wired and assembled
1-year limited warranty
Maximum Permeate Rate96.8m3/hr
ApplicationsMunicipal, Waste water, Hotel, Military, Hospital, Food and beverage, Pharmaceutical, Mining, Power and energy, Refinery, Restaurants, Agriculture, Boiler feed, Disaster relief, etc.
Approximate Concentrate Rate32.2m3/hr
Approximate Feed Rate129m3/hr
Operating LimitsMaximum Feed Temperature: 95°F
Minimum Feed Temperature: 41°F Minimum
Maximum Feed Pressure: 72 psi
Minimum Feed Pressure: 29 psi
Maximum TDS: ppm 1500
SDI: <5
pH (Continuous): 4 ~ 9
pH (Continuous): 4
Free Chlorine: Undetectable
Iron: ppm <0.1
Manganese: ppm <0.05
Organic matter: ppm <1
Recovery Rate75%
Ordering Guide

ManufacturerCNP
Model1000mg/L Feed TDS design: CDLF120-50-2 (60hz) x1
2500mg/L Feed TDS design: CDLF42-60 (60hz) x3
Motor HP1000mg/L Feed TDS design: 75kw
2500mg/L Feed TDS design: 3 x 37.0kw
Wet Contact Materialss316
Membrane and housing Membrane model: LP22-8040
Membrane manufacturer: Vontron
Membrane rejection: 97-99%
Housing: FRP, 300psi, side port (for ≤ 1000ppm) FRP, 450psi, side port (for ≤ 2500ppm)
Design Flow Rate129m3/hr
Pump Pressure (at design flow rate)1000mg/L Feed TDS design: 13.6 bar
2500mg/L Feed TDS design: 18.8 bar
Boost pump Type: vertical multi-stage centrifugal
Pump material: SS316L
Connection: DIN Flange
Pump brand: CNP
Membrane Quantity108
Membrane Housing Quantity6 element
Membrane Housing Array9 > 6 > 3
Electrical Valve Feed valve: UPVC
Flush valve: SS316
Instrumentation Flow meters: permeate, concentrate, concentrate recycle
Conductivity: permeate
Pressure gauge: pre-filter, post-filter, pump discharge, concentrate
Pressure switch: feed, RO membrane inlet
Filter HousingHPCF-9DC4
PP Cartridge Length40"
Filter Housing Qty.4 (9 per housing)
Inlet6" Flange
Permeate5" Flange
Drain3" Flange
CIP Inlet4" Flange
CIP Conc. Outlet3" Flange
CIP Perm. Outlet2" DIN or Sch80
Approximate Height78.74"
Approximate Width236.22"
Approximate Depth66.93"
Approximate Shipping Weight4409 lbs
Antiscalant Feed SystemMetering pump: 15L/hr
Chemical tank: 500-1000L
CIP SystemCIP tank: 6000L
CIP pump: 144m3/hr @ 3.5bar
CIP filter: BF-1-2 x3
PretreatmentPT MC-180 x3